Introducing BlinkForms™: Your Shortcut to Effortless Nail Enhancements!

Dream of creating salon-quality nails in an instant? Look no further than BlinkForms™ by Light Elegance – the revolutionary reusable nail forms designed to make flawless nail enhancements easier than ever. These innovative pre-shaped guides take the stress out of sculpting, letting you achieve perfect, professional results with ease.

Simply apply your Lexy Line gel to the BlinkForm™, position it on the nail, and cure. Once cured, gently remove the form to reveal a beautifully shaped, ready-to-decorate nail enhancement. BlinkForms™ remove the need for detailed sculpting and filing, saving you valuable time and effort.

Whether you’re a seasoned nail technician or a newcomer, BlinkForms™ make creating flawless enhancements effortless. The pre-shaped forms ensure consistent, professional results every time.

Join the Blink Revolution!

Enhance your nail artistry with BlinkForms™ and experience the joy of creating seamless, beautifully structured nail enhancements.

WATCH BlinkForms™ Application with LE UK Co-Owner Jojo Wickens:

BlinkForms™ Service Guide

• Powerbond
• Lexy Line Builder Gel
• BlinkForms™
• Airbond
• LEpro Cleanser and LEpro Cleansing Wipes
• LEpro Cuticle Pusher
• Optional - LE Zippy eFile with Z-Bits (for cuticle detailing)
• 100/180 Grit Lexy File or LE Perfect File
• LE FlashDot™ Curing Lamp
• LE LEDdot Lamp

Preparation:

1. Cleanse the natural nails with LEpro Cleanser and LEpro Cleansing Wipes.
2. Gently push back the proximal nail fold with the LEpro Cuticle Pusher and remove cuticle tissue. For detailed cuticle work, use the LE Zippy eFile and Z-Bits.
3. Lightly prep the natural nails with the 180 Grit side of a Lexy File or LE Perfect File. Cleanse the nails again, ensuring all dust and debris are removed.

1. Pre-measure and adjust the BlinkForms™ to fit the natural nails.
2. Cleanse the nails again with LEpro Cleanser and LEpro Cleansing Wipes.
3. For increased adhesion, apply Airbond to the natural nail surface. Allow to air dry for 10-15 seconds.
4. Apply a thin, even layer of Powerbond, capping the free edge. Cure for 60 seconds in the LEDdot lamp.
5. Apply an even layer of Lexy Line Builder Gel on the underside of the BlinkForm™, following the form's guidelines.
6. Position the BlinkForm™ at the cuticle area of the nail plate and gently rock it down onto the nail, allowing the gel to spread towards the free edge.
7. While holding the form in place, flash cure with the FlashDot™ curing lamp for 10 seconds.
8. Flip the nail upside down and use a gel brush to smooth the underside of the free edge before the final cure. Cure for 60 seconds in the LEDdot lamp (you may wish to cure the underside of the nails as an extra measure if gel application is thick). Repeat with the remaining nails.
9. Once all BlinkForms™ are applied and fully cured, gently pinch and remove the forms.
10. Shape the sidewalls, lower arches, and nail edges with the Perfect File.
11. Remove dust from the nails with LEpro Cleanser and LEpro Cleansing Wipes.

• Avoid applying too much pressure, as this can cause the gel to overflow.
• Rock the form from the cuticle to the free edge so any excess gel moves towards the free edge. Excess gel indicates too much product or pressure.
• Adjust the form closer to the skin if necessary.
• Surface filing should be minimal unless necessary to remove excess gel from application.

BlinkForms™ Application ( BlinkForms™ Extended Free Edge with Overlay):

1. Pre-measure and adjust the BlinkForms™ to fit the natural nails.
2. Cleanse nails again with LEpro Cleanser and LEpro Cleansing Wipes.
3. For increased adhesion, apply Airbond to the natural nail surface. Allow to air dry for 10-15 seconds.
4. Apply Powerbond in a thin, even layer, capping the free edge. Cure for 60 seconds in the LEDdot lamp.
5. Apply a layer of Lexy Line Builder Gel on the BlinkForm™ to achieve cohesive length. Lightly position the form near the apex area of the nail.
6. Hold the form in place and flash cure with the FlashDot curing lamp for 10 seconds.
7. Flip the nail upside down and smooth the underside of the free edge with a gel brush. Cure for 60 seconds in the LEDdot lamp or two minutes in a UV lamp (for coloured gels, cure the underside to ensure even curing).
8. Gently squeeze the BlinkForm™ to release it from the gel.
9. Apply a slip layer of Lexy Extreme Gel without curing. Add a second layer at the apex, then smooth over the nail, particularly focusing on the arch. Cure for 60 seconds in the LEDdot lamp.
10. Finish file as necessary before smoothing the surface with the Foamie buffer.
11. Remove dust from the nails with LEpro Cleanser and LEpro Cleansing Wipes.

Tips & Tricks:

• Avoid excess pressure, which can cause gel overflow.
• Rock the form from cuticle to free edge to push out any excess gel.
• If using coloured Lexy Line Builder Gel, flip and cure the underside for thorough curing.

Your BlinkForm™ nails are now ready for decoration!